Safe use of electric heat traces:
1. When in use, the connection between the electric cable and the electrical must be moisture-proof, which can prevent the generation of electric sparks.
2. Special electrical components need to be used in explosion-proof occasions, and products without certification must not be used.
3. The switch of the electric cable must be installed with overload, install the leakage protection switch, and automatically disconnect the power supply in time in case of danger.
4. The two wires of the bus bar in the electric tracing, one is the live wire and the other is the zero line, so the tail of the electric cable cannot be twisted together, otherwise a short circuit will occur.
5. When choosing electric heat trace, you must choose a regular electric heat trace manufacturer and choose qualified products. Certificates of conformity and inspection reports are required when leaving the factory.
6. After the installation of the electric trace, after the first successful commissioning, it is necessary to regularly check the use of the electric trace, and find that the operation of the electric trace is abnormal, or there is damage and knotting phenomenon, and it should be dealt with in time.
